The Canon PIXMA TS3322 All-in-One Printer allows for quick printing. The PIXMA TS3322 Printer is more than a printer. It has an easy to replace 2-cartridge FINE Hybrid Ink System. Advanced configurations using Wireless Connect allow for fast and easy reloading of plain and picture paper. You can also print directly from your tablet or smartphone using the Canon Print App, as well from computers and laptops with built-in Wi-Fi. 

Wireless connection is quick and easy to set up from your mobile.

The PIXMA TS3322 has been designed for simplicity and easy substitution. You can print from all locations, including smartphones, tablets, and laptops. Easy to use canon ts3322 wireless setup. You can read this blog to learn more about the Canon TS3322 setup and how to fix common TS3222 problems.

Manually Install or Setup Canon TS3322

You must complete the Canon TS3322 setup manual to be able to use all functions of the Canon TS3322 printing device. Before you install the Canon TS3322 Wireless Printer, ensure you have secure internet access and record the SSID name as well as the wireless network key. 

The following instructions are required to set up the Canon TS3322 wireless printer manually.

  • Switch on the printer.
  • Choose the Easy Wireless Connect option when you are printing.
  • Keep pressing and holding the Direct button for a few seconds.
  • From the control panel, select the Startup option.
  • You must agree to the License Agreement. Select your region and click “Yes”
  • Select the connection approach you prefer by clicking “Next”.
  • Choose your SSID from the list of wireless networks available.
  • Geben Sie Ihre Netzpasswort ein.
  • Follow the on-screen instructions to configure the network.
  • Once the Canon TS3322 Printer Configuration is completed, click “Complete”, to close the installation process.

Canon TS3322 Wireless Installation

How can I connect Canon Pixma TS3322 Printer to WiFi?

Before you can manually connect your Canon TS3322 Printer with Wifi, it’s important to first set up your TS3322 printer following the instructions above. canon ts3322 wont connect to wifi If you have a Canon TS3322 printer CD, you can use that to bind the printer to Wifi. The Canon TS3322 printer drivers can be downloaded from Canon’s official site. 

Below are the steps for connecting a Canon TS3322 printer with WiFi.

  • Make sure that the printer is on.
  • Press and hold the power button for several seconds to turn on your printer.
  • Press and hold the home key on your printer’s Control Panel.
  • Touch the wireless settings
  • Go to the page for setting up wireless LAN.
  • From the drop-down menu, choose “simple Wireless Link”.
  • Select Yes
  • Choose the right wireless network
  • Enter your password for your wireless network
  • After the printer planning has been completed, return to your configuration screen and finish the setup.

Canon TSC 3322 Wireless Setup on Mac

These steps will make it easy to connect your Canon TS3322 printer with your Mac.

  • Press the control button to turn on your printer
  • Click on the Control Panel for wireless configuration options.
  • You can choose the wireless link option.
  • You can retrieve your printer drivers by visiting the Canon website.
  • After the Canon Pixma TS3322 driver is downloaded, open the folder on your Mac.
  • Select Next from the configuration wizard tab.
  • After you have entered your device’s username, password, and installation helper options, click the “Install Helper” button.
  • Choose the selection to start the configuration process.
  • Next, choose a suitable location.
  • Select yes to agree to the licensing agreement.

Canon TS3322 Wireless Setting up for Windows

To learn how to wirelessly set up the Canon HTML3322 printer on a Windows device, follow these steps:

To import and execute the setup file you can either use a CD or go to Canon’s official website to download Canon Pixma T3322 driver.

  • Once you have finished downloading the file click Open Configuration File and then click Start Setup.
  • Next, select a suitable location and click the button.
  • Select yes to agree to the licensing agreement.
  • Select I accept the survey.
  • Next, choose the right choice.
  • Select yes when the relation form appears.
  • Select the wireless router that you prefer from the available list.
  • Click next after entering your network key password.
  • Next, select until the connection completes.
  • An image screen will be displayed.
  • Follow the instructions to run the test print.

Canon Pixma T3322 Ink cartridge Installation and Refill

These steps will help you complete the Canon TS3322 Ink Refill.

  • Make sure that the printer is on.
  • The cover or scanner can be raised.
  • The replacement spot will receive the holder to hold the print head.
  • Press tab A to empty the ink cartridge and lift the cartridge for removal.
  • You should remove the cartridge of ink from its package and throw away the safety tape and film.
  • With the orange safety cap facing up, hold the Canon PixmaTMa TS3322 cartridge and ensure that the white outline airhole is not blocked.
  • Lift the tab to take off the orange safety band.
  • Place the cartridge’s front end into the printhead at a gentle angle.
  • Make sure the ink cartridge labels match.
  • Continue pressing down on the cartridges’ top until they snap into place.
  • Close the scanning lid.
  • You have completed installing your Canon PixmaTMa TS3322 ink.

Canon TS3322 Troubleshooting Wireless Setup

Why won’t Canon TS3322 prints?

If the Canon TS3322 printer stops printing, ensure that it is properly wired. After that, ensure the printer is connected to the wireless network. It is also a good idea to double-check that your printer settings match those of the back tray. End all print jobs that you don’t need from your printer. how to connect canon ts3322 printer to iphone Reinstall the Canon TS3322 Driver Printer Driver to resolve the Canon TS3322 printer error.

Why won’t my Canon TS3322 scanner turn on?

A Canon TS3322 error may occur for several reasons. These steps will help you fix the problem.

  • Turn on your Canon TS3322 printer.
  • Connect the USB cord, which is included with your printer, to the USB port on your computer.
  • Verify that the network link is in good condition. If the connection configuration is not working properly, you can reset it.
  • Restart your computer and run a document scan.

What to do if your Canon TS3322 printer isn’t working?

These steps will help you fix an offline error.

  • Start the menu on your laptop
  • Select the control panel in the start menu
  • From the control panel, select devices or printers
  • Right-click your printer icon to open the drop-down menu and select Use Printer Online.

How do I complete my Canon TS3322 wireless setup?

These steps will help you complete your Canon Pixma wireless setup

  • Turn on Easy Wireless Connect.
  • You will need to press the Direct button for a few seconds.
  • From the initial panel, select the Start-up option.
  • Geben Sie Ihre Netzpasswort ein.
  • Follow the instructions on the screen and wait until the network configuration is complete.
  • Once the Canon TS3322 Printer Configuration is completed, click “Complete”, to close the installation process.

How can I adjust the quality print on my Canon Pixma TS3322 printer?

These steps will help you change the quality of your Canon TS3322’s print output.

  • Select “Print Quality” from the Printer Driver Configuration Wizard on your computer.
  • Choose the Custom option in the Main tab.
  • Once the Custom dialog box appears, select “Print Quality level” and press OK.
  • The configuration process will not be completed until the print output standard is set.

How to fix a paper jam with a Canon TS3322 printer.

These steps will help you solve your paper jamming problems.

  • Turn off the printer and unplug it.
  • Remove the front cover from your printer.
  • To take it out, gently pull the print head towards the right.
  • When you move the pointer to the left, the gears are exposed. Change the gears a few more times.
  • Print a test page and restart your printer.

Leave a Reply

Your email address will not be published.