If you own an ATV, you are probably aware of the fact that you need to change the air filter and the engine oil from time to time to keep your ATV in good condition for a long time. Regular maintenance of an ATV is required to retain its efficiency for a long time. Sometimes, you may find that your ATV air filter is not working the right way. well, this may happen due to various reasons. But if such a situation arises, you don’t need to replace the air filter. All you have to do is to clean it properly and its functionalities will be restored all over again.
Here, in this content, you will come to know about the three important reasons for cleaning your ATV air filter from time to time. If you own an ATV, you know how important it is to maintain the vehicle from time to time. Let’s have a look at the reasons below-
When your air filter is clogged, fresh air can’t pass through it and thereby ultimately results in less air entering the engine which means less horsepower. You are investing a good amount of money for your ATV, you deserve to avail yourself more horsepower which is capable of producing. To get more horsepower, make sure your ATV air filter is properly cleaned so that your engine can gulp as much as it can and provide the best service.
Less requirement for an oil change
The more debris and air get stuck in your air filter, the more dirt and debris will enter the engine of your ATV and it will gradually degrade the performance of your engine. Some of the contaminants make their way to the engine oil due to which you may need to change the engine oil frequently. When your engine oil is dirty, it cannot lubricate the ATV’s engine as efficiently as clean oil does.
Enhances engine life
Most of the dust and debris make their way directly into the engine’s combustion chamber where it causes scars and scratches on the walls of the piston heads, cylinders, and piston rings. When such things happen, we think about replacing the expensive cylinder head or top-end rebuilds. A properly cleaned air filter prevents the dirt from entering into ATV’s engine and thereby extends the lifespan of the engine.
How often do you need to clean the ATV’s air filter?
You should consider cleaning your ATV’s air filter with every motor oil change means approximately after 50 hours of use of the vehicle. However, if you ride in sandy and dusty conditions, you have to clean your air filter more frequently to retain the efficiency of the engine for a long time.
A good habit is to check the air filter of your ATV after every ride. It may seem a difficult job, but keep in mind that a properly cleaned air filter means more horsepower, a longer durability of the engine, and less requirement for the oil change. When you can get all these benefits by doing this one task then why not avail this opportunity.
Like ATV air filters, go kart wheel bearing also requires frequent servicing to retain its longer lifespan.
Now let’s talk about the ATV chains and their prices:
So, Where to avail ATV chains at cheap prices?
With the growing use of ATV vehicles, there are many online stores where you can find ATV parts at cheap prices. This has made the task customer difficult of choosing the right chain as per their requirements. Almost all online shops claim to offer the best quality products. But among them, only a few are capable of offering so and therefore, you need to make the selection very carefully.
Before you take the purchasing decision, make sure you compare the quality and prices with other websites. If you are a first-time buyer and don’t have much information about ATV parts, you should prefer reading the booklet. By reading the booklet, the buyer can easily install the chain. They are quite user-friendly and come with a lot of advantageous features. From these online stores, you can avail cheap dirt bike parts at affordable prices.
While installing ATV chains, you will find room between ATV wheels. It means you will get more free space while completing the installation process. For a six-wheeled vehicle, you may find installing an ATV tire chain complicated but if you read the booklet properly, you won’t find it too difficult. The aim is to set up everything in a proper way so that you don’t have to face any difficulty or regret later. The process mainly starts by placing the chain on the ground and thereby removing it through twists and knots.
It should be of your knowledge that the installation procedure of each ATV chain is unique. It is suggested that you read the installation booklet properly and follow the instruction to avoid any difficulty. At first, the task will appear difficult and complicated for you. But with time, it will get easier and effortless.